Three stage creep behavior of MgO containing ordinary refractories in tension and compression

In service tensile and compressive stresses occur in refractory linings, these stresses lead to creep of refractories. Ordinary refractories experience creep of the primary stage and may further proceed to the secondary and tertiary creep stage. For the development of advanced material models for finite element simulations it is necessary to investigate the creep behavior in all three creep stages under tensile and compressive loads. Hence, two advanced high temperature uniaxial creep testing devices, applying a wide range of tensile and compressive loads, were used to determine the three creep stages in a reasonable time under service related loading conditions. The Norton–Bailey creep equations and an inverse identification procedure were applied for the evaluation of the experimental results. A magnesia refractory was studied at elevated temperatures and its respective creep parameters for each stage were determined. The stress dependency on the creep behavior can be seen clearly on the creep curves and the corresponding creep parameters. Furthermore, a comparative study of creep parameters and creep rates was performed between the magnesia refractory and a magnesia-chromite refractory. The results demonstrate the significant asymmetrical creep behavior in tension and compression for both materials. The creep investigation in this paper favors the requirement for consideration of the three stage creep behavior and the asymmetrical creep behavior in thermomechanical modelling activities of industrial vessels.     

Automatic brain tissue segmentation in MR images using hybrid atlas forest based on confidence-weighted probability matrix

The segmentation of specific tissues in an MR brain image for quantitative analysis can assist the disease diagnosis and medical research. Therefore, a robust and accurate method for automatic segmentation is necessary. Atlas-based-method is a common and effective method of automatic segmentation where an atlas refers to a pair of image consist of an intensity image and its corresponding label image. Apart from the general multi-atlas-based methods, which propagate labels through the single atlas then fuse them, we proposed a hybrid atlas forest based on confidence-weighted probability matrix to consider the atlases set as a whole and treat each voxel differently. In the framework, we first register the atlas to the image space of target and calculate the confidence of voxels in the registered atlas. Then, a confidence-weighted probability matrix is generated and it augments to the intensity image of the atlas or target for providing spatial information of the target tissue. Third, a hybrid atlas forest is trained to gather the features and correlation information among the atlases in the dataset. Finally, the segmentation of the target tissues is predicted by the trained hybrid atlas forest. The segment performance and the components efficiency of the proposed method are evaluated on the two public datasets. Based on the experiment results and quantitative comparisons, our method can gather spatial information and correlation among the atlases to obtain an accurate segmentation.     

The effect of optimized carbon source on the synthesis and composition of exopolysaccharides produced by Lactobacillus paracasei

This study aimed to predict the optimal carbon source for higher production of exopolysaccharides (EPS) by Lactobacillus paracasei TD 062, and to evaluate the effect of this carbon source on the production and monosaccharide composition of EPS. We evaluated the EPS production capacity of 20 strains of L. paracasei under the same conditions. We further investigated L. paracasei TD 062, which showed the highest EPS-producing activity (0.609 g/L), by examining the associated biosynthesis pathways for EPS. Genomics revealed that fructose, mannose, trehalose, glucose, galactose, and lactose were carbon sources that L. paracasei TD 062 could use to produce EPS. We identified an EPS synthesis gene cluster that could participate in transport, export, and sugar chain synthesis, and generate 6 sugar nucleotides. Experimental results showed that the sugar content of the EPS produced using fermentation with the optimized carbon source (fructose, mannose, trehalose, glucose, galactose, and lactose) increased by 115%. Furthermore, use of the optimized carbon source changed the monosaccharide content of the associated EPS. The results of enzyme activity measurements showed significant increases in the activity of 2 key enzymes involved in the glycoside synthesis pathway. Our study revealed that optimizing the carbon source provided for fermentation not only increased the production of EPS, but also affected the composition of the monosaccharides by increasing enzyme activity in the underlying synthesis pathways, suggesting an important role for carbon source in the production of EPS by L. paracasei TD 062.     

The changes of chemical composition of microencapsulated roselle (Hibiscus sabdariffa L.) seed oil by co-extrusion during accelerated storage

Roselle seed oil (RSO) is an underutilised seed oil, which is having beneficial properties to humans. Microencapsulation of vegetables and seed oil is an alternative to preserve these properties and deliver them to the human diet. In this study, microencapsulation of RSO was performed using co-extrusion technology and 1.5% w/w sodium alginate solution with 1.5% w/w high methoxyl pectin as the wall materials. Results showed that the microencapsulation efficiency was high (95.68 ± 1.95%) and the microencapsulation indeed preserved the content of unsaturated fatty acids, phytosterols, and tocopherols. During an accelerated storage condition at 65 °C for 24 days, most of these properties remained high for the first six storage days, including tocopherol which preserved high γ-tocopherol. Worth noting that the microencapsulated RSO (MRSO) was particularly effective in preserving the total unsaturated fatty acids (especially C18:1 and C18:2), even during the 24th day of storage. The total unsaturated fatty acids retained by MRSO were significantly (P < 0.05) higher (70 ± 0.4%) than the RSO (65.6 ± 1.6%). In short, microencapsulation was effective in preserving the RSO properties.     

四卷扬同步控制性能分析

随着吊装重物的大型化,单卷扬单吊钩的形式已不能提供足够的起重力矩来吊取重物,工程上常采用多卷扬单吊钩的吊取形式.但卷扬系统各自单独的液压控制系统常常会存在泄漏、参数不一致和比例阀死区等问题,导致马达输出角度之间存在同步误差.同时,卷筒平均半径的不一致和吊钩存在的初始角度误差也会导致钢丝绳出绳长度不一致,进而导致吊钩发生倾斜,存在安全问题.基于四卷扬单吊钩的形式,提出了将四卷扬系统分为两组,组间以吊钩水平倾角数据作为反馈量采用交叉耦合控制,系统内采用马达转角数据作为反馈量,采用主从控制的控制方法,利用常规PID和滑模变结构分别进行控制.仿真研究表明,此种控制系统可以很好地消除吊钩存在水平倾角的问题,控制系统的控制性能较好,鲁棒性较强.     

Creep testing of carbon containing refractories under reducing conditions

Mechanical testing of carbon containing refractories at high temperatures requires measures to protect the sample from oxidation. Therefore, special setups for tensile and compressive creep testing were developed to prevent the oxidation of carbon in the sample. A MgO-C refractory was selected for a case study. These developments allow the quantification of the tensile and compressive creep behaviour of MgO-C refractories at temperatures up to 1500?°C. The creep parameters are determined by an inverse evaluation method for the obtained experimental data. They enable the consideration of creep in a thermomechanical finite element simulation of refractory linings in service.     

Improve efficiency and anti-offset using new pot ferrite core in wireless power transmission system

Electrical Engineering - The issue of magnetic flux leakage has received considerable critical attention, which severely reduces the transmission efficiency and loses a lot of energy in wireless...     

基于Marr小波改进的SIFT算法的遥感影像配准

〖HTH〗通讯作者〖HTSS〗:[ZK（]金〓燕(1991-)，女，山东济宁人，硕士研究生，主要从事图形图像处理，图像与视觉信息计算方面的研究。E\|mail:jyan0529@163.com。[ZK）] 〖ZW)〗〖HT〗 〖AM〗〖HT5SS〗〖MM(〗〖ZZ(S〗〖HT5”〗〖SX(B〗第34卷〓第3期〖〗2019年6月〖SX)〗[KG0.2mm]〖KG7*3〗〖HT〗〖SX(B〗遥〓感〓技〓术〓与〓应〓用〖〗〖WT5，6〗REMOTE SENSING TECHNOLOGY AND APPLICATION〖SX)〗〓〓〓〓〖KG6*2〗〖WT5”BX〗〖SX(B〗Vol.34〓No.3〖〗Jun.2019〖WT〗〖SX)〗〖ZZ)〗〖MM)〗〖HT〗 〖HT2H〗〖JZ(〗〖WTHZ〗〖STHZ〗 基于Marr小波改进的SIFT算法的遥感影像配准 〖STBZ〗〖WTBZ〗〖HT4K〗 张海涛，金〓燕，刘万军 〖HT5K〗 (辽宁工程技术大学 软件学院，辽宁 葫芦岛〓125105) 〖JZ)〗〖ＨＴ５Ｈ〗〖GK2!2〗摘要〖HTK〗: [KG(0.1mm]针对遥感图像配准方法中错误匹配点对过多、配准效率低和其他性能，提出了一种基于小波的遥感图像配准方法。首先，利用尺度空间理论下的Marr小波对参考图像和待配准图像进行特征提取，然后利用欧氏距离对参考图像和待配准图像的特征点进行初配准，再根据随机采样一致法，对初配准结果进行精配准。为了验证方法的有效性，选择无人机实时航拍图像、不同时相变化遥感图像以及遥感不同高度的遥感图像。实验结果表明：该方法与SIFT(Scale Invariant Feature Transform)算法以及其他改进SIFT算法相比可以有效剔除错误匹配点对，提高了配准精度，同时提高配准效率两倍以上。该方法可以应用于不同遥感数据源，能够有效地提高配准精度，降低配准时间。[KG)] 〖ＨＴＨ〗关〓键〓词〖ＨＴ５Ｋ〗: 遥感图像配准;Marr小波;欧氏距离;随机采样一致法 〖ＨＴＨ〗中图分类号〖HTSS〗:TP79〓〓〖HTH〗文献标志码〖HTSS〗:A〓〓〖HTH〗文章编号〖HTSS〗:1004 0323(2019)03 0622 08 〖HK〗〖HT5SS〗     

A dynamic SVR–ARMA model with improved fruit fly algorithm for the nonlinear fiber stretching process

Natural Computing - The fiber stretching process plays the key role in the process of fiber production and its effects is measured by the stretching ratio. The stretching ratio is determined by the...